Uncrated and in the Door

Removing the crate was not much trouble.  All we have to do is get it off the tailor and through  the 4 ft door in the shop.

I hired a wrecker from town to come out and lift it off the tailor.  I have an engine hoist, but it never would have worked for this task.  There was a considerable amount of jogging and persuading to get it through the door.  We placed it on a 2' by 4' sheet of 3/4" plywood, which sat on 5 large pipe rollers.  It was easy to move, but had to be angled and some pry-bar work was needed to get it through the door.

Just inside the door, still on the plywood and rollers.  I decided that I would remove the cosmolene and pre-drill the holes in the concrete floor before moving it in place.  

SITEMAP

GRIZ MILL

GRIZ-MILL 2

GRIZ-MILL 3

GRIZ-MILL 4

GRIZ-MILL 5

GRIZ-MILL 6

GRIZ-MILL 7

GRIZ-MILL 8